CP201

Sight Adjustments

Elevation: foreward knurled knob on left side of sight block. Clockwise up (toward “T”). 1 click = 2mm @ 10m.
Windage: rear knurled knob on left side of sight block. Clockwise right (toward “L”). 1 click = 2mm @ 10m.
Adjustable rear blade width: Adjustment screw is in the rear of the sight base below blade. Clockwise to reduce width. Adjustment range 3.3mm to 4.4mm.

Trigger Adjustments

Trigger Shoe: Lock screw “a”. Loosen to position shoe as desired.
Trigger Weight: Screw “b”. Clockwise to increase.
Trigger Takeup: Screw “c”. Clockwise to reduce first stage travel.
First Stage Weight: Screw “d”. Clockwise to increase pressure.
Trigger Stop: Screw “e”. Clockwise to reduce after travel.
Sear Engagement: To adjust, cock the pistol and turn screw “f” slowly clockwise until the sear releases. Then turn anti clockwise about 1/4 to 1/2 a turn.

Dry Fire Mechanism

There is a dry fire switch on the right hand side of the receiver directly above the trigger. To set, first cock the pistol. Then turn set screw with hex key until the dot lines up with the “T”. Replace to “F” for live fire.