PARDINI PC
Available in 9×21, 40S&W and 45ACP.
Sight Adjustments
Elevation: Clockwise down.
Windage: Clockwise right.
Trigger Adjustments
Second Stage Weight: Turn inner screw 1 clockwise to increase.
Second Stage Travel: Turn screw 1 clockwise to increase 2nd stage travel.
Trigger Stop: Turn screw 2 clockwise to reduce overtravel.
Trigger Pull Length: Screw 3.
Sear Engagement: Screw 4. Both screws 3 and 4 are not recommended to be adjusted by non-qualified persons.
Stripping
 |
Remove magazine and check pistol is not loaded. Hold the pistol as shown. Use your left index finger to push in the take down button until it clears the frame, then with your left thumb, rotate the take down lever down 90 degrees. |
 |
Slide off the barrel shroud/slide unit from the frame. |
 |
Take care because the main spring is compressed. Holding the slide in your left hand, push in the main spring rod assembly towards the muzzle. Disengage sideways from the slide seating and take care to slowly release the spring tension. |
 |
For models fitted with a compensator block, unscrew the locking screw. Remove the barrel from the frame. To reassemble, proceed in reverse order. Take care to ensure that, prior to locking the take down lever, the barrel/slide assembly is pushed a little beyond the lock-up position. |