© 2017, Pilkington Competition

MATCH MG1

Sight Adjustments

 

Clockwise down (#1)
Clockwise right (#2)
1 click = 2mm at 10m.

Rear Notch
Turn screw #3 clockwise to make notch wider.
Turn screw #4 clockwise to make notch deeper.

 

Trigger Adjustments

First Stage Travel
By turning Screw #1 clockwise the first stage travel shortens.Second Stage Travel
The grip must be removed to access this. By turning Screw #2 clockwise travel will increase.

First Stage Weight
Turn Screw #3 clockwise to increase weight.

Second Stage Weight
Turn Screw #4 clockwise to increase weight.

Trigger Stop
By turning Screw #5 clockwise after travel will shorten.

 

Velocity Adjustment

By turning screw #1 the velocity will increase.
Caution: Do not try to turn the screw any further when you reach the built-in lock.
This pistol was designed for a maximum of 7.5 joules of energy, therefore trying to turn the screw beyond the built-in lock will result in a stoppage of the pistol.
If the screw is turned beyond its factory set stop point the manufacturer will not be responsible for any damages which may occur to the pistol or its user.

Return to TenP Files Index