BERETTA MODEL 89
Sight Adjustments
Elevation: Clockwise down.
Windage: Clockwise right.
Front Sight
The front sight blade can be changed by loosening 2mm socket head screw at the mozzle end. 3mm sight is supplied on the pistol, and 2.5 and 2mm come with the gun as spares.
Trigger Adjustment
The only trigger adjustment available is the trigger stop. Use 1.5mm allen key and turn clockwise to reduce after travel.
Stripping
 |
Ensure pistol is safe, and remove magazine. Loosen the two counterweight locking screws using 4mm allen key (at least one quarter turn). |
 |
Using the same allen key loosen the counterweight adjusting screw at least half a turn. |
 |
Hold pistol in the left hand, press the disassembly latch release button with forefinger. |
 |
With right thumb rotate disassembly latch anti clockwise until it stops. |
 |
Pull forward slide and barrel assembly, recoil spring and spring guide. |
 |
Pressing recoil spring guide head (caution: the recoil spring is under tension), lift the recoil spring guide and let the spring stretch slowly. Separate barrel-monoblock from slide. |