AERON B96
Sight Adjustments
Elevation – right knob – clockwise up.
1 click = 3.1mm @ 10m.
Windage – left knob – clockwise left.
1 click = 2.6mm @ 10m.
Dry Firing
Cock the pistol by pulling forward on crossbar #26 (towards the muzzle).
Push safety (on right hand side of receiver above crossbar) forward (rotate clockwise 45 degrees) to engage. This will allow you to dry fire; the safety limits the rearward movement of the cocking piece, thereby preventing it from unseating the gas piston and expelling gas.
IMPORTANT! Ensure the crossbar is fully forward when you disengage the safety. If you do not, it could result in firing the pistol as the safety is released. This can be both unsafe and embarrassing.
The manual also stresses you do not dry fire without the safety when there is no gas in the gun. I assume this can cause some internal damage.
Trigger Adjustments
In order to gain access to the adjusting screws the trigger guard must first be removed. This is held in place by the counter weight bar. To unscrew this, place the appropriate sized allen key in the counter weight and use it as leverage to unscrew the bar.
The three adjusting screws from front to rear are as follows:
1. Trigger weight.
2. Trigger stop.
3. Front trigger stop (adjusts takeup travel).