NEGRINI CASE INSTRUCTIONS
OPERATING INSTRUCTIONS
Front change combination lock
The locks are set at the factory to open at 0-0-0
To set your own combination:
Remove the red arrow before setting the lock.
1. Choose 3 digits which you can recall easily-address, phone, birthday,etc.
2. Press the button in a direction toward the dial with your thumb and hold. With your other hand (Use point of ball pen) rotate the dials to the desired setting. Then, release the button.
3.Your lock is now set to open on the three digits engaged at the time you release the button.
CAUTION!
4. Accordingly-NEVER rotate the dials with the button held open UNLESS you make careful note of the dial setting upon release of the button.
5. The manufacturer is not responsible for damage resulting from misuse, abusive handling or failure to follow instructions.
ATTENTION
By replacing the weapon in the case, make sure that both weapon and inner side of the case are perfectly dry and that there is no water or humidity.